Defined ridge pattern
The roller has 14 ridges along its length and 35 around its circumference.
Replacement Multifunction Steering-Wheel Roller
99,00 Kč
Sale price
99,00 Kč
Regular price
Skip to product information
Buy with confidence
Careful 3D printing
Every item is checked before dispatch.
Need help choosing?
Message us and we’ll help you choose the right option.
A replacement for a worn control
Restore the roller on your multifunction steering wheel
The replacement roller has 14 ridges along its length and 35 around its circumference and is intended to fit onto the existing control mechanism.
Press-fit installation
Ideally, the part presses into place and remains secure without further work.
Option for a consistent appearance
Replacing the rollers on both sides at the same time is recommended for a consistent appearance.
Made for everyday use
Allow for possible adjustment
The roller may not always fit exactly. The inner aperture may need sanding, or the roller may need to be glued in place.
Compatibility
Intended as a replacement selector roller for a multifunction steering wheel. Before ordering, compare its 14 lengthwise and 35 circumferential ridges with the original part.
Installation and use
First try pressing it into place. If it does not fit exactly, carefully sand the inner aperture or use adhesive if required.
Material and design
The roller has 14 ridges along its length and 35 around its circumference.
FAQ
Frequently asked questions
How many ridges does the roller have?
It has 14 ridges along its length and 35 around its circumference.
How is the roller installed?
Ideally, it is pressed into place.
Is an exact fit guaranteed?
No. Depending on the control mechanism, the inner aperture may need adjustment or the roller may need to be glued in place.
What if the aperture does not fit?
The inner aperture may need careful sanding, or the roller may need to be glued.
Should I replace both sides?
Replacing both sides together is recommended for a consistent appearance.
Ready to order?